Rubber conveyor belts move based on the principle of friction transmission and are suitable for conveying powder, granular, and small pieces of low grinding materials with a bulk density of less than 1.67/ton/cubic meter, as well as bagged materials that are easy to remove, such as coal, crushed stone, sand, cement, fertilizer, grain, etc. Rubber conveyor belts are mainly used for coal transportation in coal mines, as well as material transportation in industries such as metallurgy, chemical engineering, power plants, and docks. This machine has a large capacity and high efficiency. The middle layer canvas of the nylon rubber conveyor belt is nylon canvas. Nylon belt buckle joint, this joint method is convenient and economical, but the efficiency of the joint is low, it is easy to damage, and it has a certain impact on the service life of rubber conveyor belt products. In PVC and PVG whole core anti combustion and anti-static rubber conveyor belt joints, this joint method is generally used for products below grade 8 belts.
- Rubber conveyor belt cold bonding head method: using cold bonding adhesive for joint.
Features of high inclination rubber conveyor belts: 1. Increased conveying angle; 2. Small footprint and low investment; 3. Large conveying capacity and higher lifting height; 4. Smooth transition from horizontal to inclined 5. Suitable for conveying easily scattered powder, granular, small, paste, and liquid materials; 6. Low energy consumption, simple structure, high tape strength, and long service life. This joint method is higher than mechanical and more economical, and it should have good joint effects. The conditions are difficult to master, and the quality of the adhesive has a significant impact on the joint, so it is not very stable.
- Rubber conveyor belt hot vulcanization joint method: Practice has proven to be the most ideal joint method, which can ensure high joint efficiency and is also very stable, with a long joint life and easy to master. Nylon rubber conveyor belt Nylon core rubber conveyor belt has the characteristics of thin belt body, high strength, impact resistance, good performance, high interlayer adhesion strength, excellent flexibility, and long usage time. It is suitable for conveying materials over medium to long distances and high load high-speed conditions. Nylon rubber conveyor belts not only have these advantages, but most importantly, they are fast and convenient, greatly improving work efficiency and completeness. The wavy edge guard of a large angle rubber conveyor belt is composed of three parts: the base belt, the edge guard, and the transverse partition. The edge guard plays a role in preventing material from sliding and falling. To facilitate bypassing the drum, the edge of the guard is designed to be corrugated; The function of the diaphragm is to support the material, and in order to achieve high inclination transportation, a T-shaped TC type is used. The edge and diaphragm are connected to the baseband using secondary vulcanization method, which has high connection strength but has disadvantages such as process trouble, high cost, and long joint time.
