What are the processing methods for PVC conveyor belts?

With the widespread use of mechanized production, most enterprises have already used machines to replace traditional production and processing. According to the needs of different industries, different equipment uses different conveyor belts. High toughness and non deformable PVC conveyor belts are also mixed in various industries. Of course, some industries also use special conveyor belts that require special processing methods to produce conveyor belts suitable for enterprises. Below, we will introduce the punching and adding guide bars of PVC conveyor belts.

1. Punching of conveyor belt.
   The punching method of conveyor belts is to completely punch through the back or bottom of the conveyor belt, which is called through hole and the back or bottom of the conveyor belt. One side of the conveyor belt is punched, but only a single concave hole does not penetrate the entire thickness of the conveyor belt, which is called sink hole.
2. Add guide strips to the conveyor belt.
   The conveyor belt is equipped with a guide strip, which is a rubber strip with positioning and guiding functions. Its main purpose is to ensure that the conveyor belt runs accurately on the conveyor without deviation and can also serve as a material positioning surface for the conveyor belt.
   There are many processing methods for PVC conveyor belts, and the processing accessories support surface processing: edge blocking, skirt edge, guide strip, turning, sponge, red glue, green glue punching, etc. These can be customized according to the production situation of the enterprise itself